egs. Viscose Staple fibre or Acrylic fibre Spinning jet Nozzle Spinneret
- Reference
- TP-69007220
- Family
- Spinning Components
- Lead time
- To be confirmed
- Availability
- Available to quote
Machine-specific spinning, winding and texturing parts supplied against the original reference: bobbins, grooved drums, sliver cans, spinnerets, sensors and pumps.
Specifications
- Use
- Spinning Machinery
- Type
- spinnerets of machine
- Place of Origin
- Shanxi, China
- Model Number
- CONICAL WALL HAT SHAPE SPINNERETS
- Liquid to be handled
- Viscose or Acrylic
- Shape
- Conical wall hat-shaped
- Hole No.
- 6000-25000
- Dia. of hole
- 0.06-0.15 mm
- Dia. of spinneret
- 64-90 mm
- Fibre
- Viscose Staple fibre or Acrylic
- Applicable materials
- Ta or Au-Pt
Product description
STRUCTURAL SKETCH PRODUCT MATERIAL Use Ta or Au-Pt, and Pt: Au is 3: 7. TECHNICAL QUALIFICATION PARAMETER 1 Test pressure of spinneret, see this table.(MPa) Spinning fiber Tile-shaped Hat-shaped Viscose 0.8 0.8 Vinylon 1.2 Acrylic 1.5 2 Spinneret finished hardness is more than HV180. Note: the weight of the test is 0.98N and the holding time is 15s.
3 Surface roughness a. Spinneret surface roughness Rz ≤ 0.4 μm m b. The rest of the surface roughness Rz ≤ 3.2 μm m 4 Naked eye significantly pits, scars, creases and wavy are not allowed in the surface hole area of the spinneret which spinning short filament, non porous area allows a few defects.
The spinneret surface of spinning long filament is not allowed to be defective. Note: a. The hole area refers to the inner side of the hole group, and the edge of the outermost hole of the hole group adds a pitch-row to the enclosed area.
b. In addition to the above areas, the rest section is nonporous area. 5 For the hat-shaped spinneret, the flatness tolerance of the spinneret surface and the edge of the hat is shown in following table.
About OEM Spinning & Winding Parts
Machine-specific spinning, winding and texturing parts supplied against the original reference — bobbins, drums, cans, spinnerets and sensors.