Spinning Spindles & Bearings Ref. 69005154

Two-for-one twisting machine spindles

Reference
TP-69005154
Family
Spinning Components
Lead time
To be confirmed
Availability
Available to quote

Spindles, spindle bolsters, bearing units and rotor parts for spinning and winding positions.

Request quotation

Specifications

Use
Spinning Machinery
Type
Spindle
Place of Origin
Jiangsu, China
Model Number
HW-BD1104

Product description

16 6 spindle for two-for one twister for short fiber Application This spindle is mainly used for short fiber cylindrical back twisting into a Pagoda-shaped or cylindrical bobbin. Introduction For 363 simple Short fiber two-for-one twister twistin g, On the support for the spindle bearings DZ3, Bearing aperture is Φ 8.8, Under the support for the bottom of the ingot, Under the elastic supporting structure, w harve Center height is 53, L = 56, w harve d iameter is D 2= Φ 34, D 3= Φ 1 6 6 M25×1.5, The maximum roll diameter 1 8 0, The length is 172. Structure A full set of spindle points t itanium g uide wire t ension parts, Capsule tension parts, flyer parts,a sand tank stationary parts, Stainless steel disc rotor parts, i ngot holder parts, Banana outer disk parts, a total of seven parts.

Main features Spindle structure form:Φ1 6 0(Twisting dish), Φ34(Spindle pulley)Φ 100 (Yarn storage dish) Spindle fixed:magnet magnetic; Smooth operation,in vibration over a wide speed range(5000~10000r/m) is smaller; wear-resisting,long lifetime(more than 5 years ) low-power consumption (Less than 35 w );

Smaller noise(89Pb); Bearing capacity( 1000 g); Tension device: multi-stage tension beads and tension rings were used together;

Scope of application:cotton yarn 16/2--120/2Ne yarn 2/17—2/76Nm Blended fabric 20/2—45/2Ne Number range:4.9--58.3 ( 8s’/2-100s’/2 ) Reversing bobbin Specifications:φ43.5×φ37.5×175mm; Feeding yarn.

two-for-one twisting machine spindles — detail photo

About Spindles & Bearings

Spindles, bolsters, bearing units and rotor parts for spinning and winding, selected by speed, damping system and machine interface.

All Spindles & Bearings · Spinning Components